Shenzhen Hwalon Electronic Co., Ltd.
Shenzhen Hwalon Electronic Co., Ltd. PTC/NTC thermistors manufacturer
Add to Cart
High Efficiency MCH Ceramic Heating Element Excellent Electric Performance
How to Order:
In order to help you to get the exact model, please offer the following necessary info.:
1. Application of the PTC heater(MCH):__________
2. Specific Size:________mm
3. Surface temperature:___°c
*4. R value(25 °c):_____ ohm ±________%
*5. Voltage: _____V
* Fill " * " items necessarily
Competitive Advantage:
1. RoHS compliant
2. High heat efficiency
3. Good electric performance
4. Secure invalidation mode
5. Simple construction
6. Quick in temperature rise,reach to Rating 100℃~230℃ in 10sec.,reach to 500℃~700℃ in 30sec.
7. High thermal efficiency,energy conservation,non-pollution,ROHS compliance
8. Even heating,No open flame,Safety in use
9. Heating element in the local vacuum state,Heater, acid and alkali resistant and harmful gas
10. Long service life,The power attenuation is small
Applications:
| PTC heater(MCH) | Hair dryer,hair curler,hair straightener, hair apparatus |
Description:
1, Electrical performance
Insulation resistance:R≥5×108Ω(500VDC)
Withstand voltage strength:1500VAC 1min.；1800VAC 1min.;
3750VAC 1min.；4000VAC 0.1min.;
The highest voltage:230VAC/120VAC
2, physical performance
Volume density ≥ 3.6g/cm3
Flexure strength ≥ 270MPa
Compression strength ≥ 2700MPa
Lead strain:Along the horizontal direction lead no less than
5kgf,lead and basal plate in 90℃ direction,no less than 3.5kgf
3, Temperature performance
Rating working temp.: 100℃~230℃
Max. Temp.: 500℃~700℃
Heating rate: reach to Rating working temp.in 30sec.,reach to max. Temp.In 90sec.
Specifications:
1, 10×10×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 10×10×1.3(2.0) | 24/12VAC | 9Ω | 10 | 10 | 1.3 | 75 | 0.5 |
| 10×10×1.3(2.0) | 24/12VAC | 13Ω | 10 | 10 | 1.3 | 75 | 0.5 |
2, 20×10×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 20×10×1.3(2.0) | 24/12VAC | 10Ω | 20 | 10 | 1.3 | 75 | 0.5 |
| 20×10×1.3(2.0) | 24/12VAC | 15Ω | 20 | 10 | 1.3 | 75 | 0.5 |
| 20×10×1.3(2.0) | 24/12VAC | 20Ω | 20 | 10 | 1.3 | 75 | 0.5 |
3, 30×25×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 30×25×1.3(2.0) | 24VAC | 20Ω | 30 | 25 | 1.3 | 75 | 0.5 |
| 30×25×1.3(2.0) | 24VAC | 25Ω | 30 | 25 | 1.3 | 75 | 0.5 |
| 30×25×1.3(2.0) | 24VAC | 30Ω | 30 | 25 | 1.3 | 75 | 0.5 |
| 30×25×1.3(2.0) | 24VAC | 35Ω | 30 | 25 | 1.3 | 75 | 0.5 |
4, 55×10×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 55×10×1.3(2.0) | 3.7VAC | 0.3Ω | 55 | 10 | 1.3 | 75 | 0.5 |
| 55×10×1.3(2.0) | 3.7VAC | 0.35Ω | 55 | 10 | 1.3 | 75 | 0.5 |
| 55×10×1.3(2.0) | 3.7VAC | 0.4Ω | 55 | 10 | 1.3 | 75 | 0.5 |
| 55×10×1.3(2.0) | 3.7VAC | 0.5Ω | 55 | 10 | 1.3 | 75 | 0.5 |
5, 70×7×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 70×7×1.3(2.0) | 220VAC | 180Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 220VAC | 150Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 220VAC | 140Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 220VAC | 120Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 220VAC | 110Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 110VAC | 80Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 110VAC | 60Ω | 70 | 7 | 1.3 | 75 | 0.5 |
| 70×7×1.3(2.0) | 110VAC | 40Ω | 70 | 7 | 1.3 | 75 | 0.5 |
6, 70×10×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 70×10×1.3(2.0) | 220VAC | 180Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 220VAC | 150Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 220VAC | 140Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 220VAC | 120Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 220VAC | 110Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 110VAC | 80Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 110VAC | 60Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 110VAC | 40Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 3VAC | 2Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 12VAC | 6Ω | 70 | 10 | 1.3 | 75 | 0.5 |
| 70×10×1.3(2.0) | 12VAC | 10Ω | 70 | 10 | 1.3 | 75 | 0.5 |
7, 70×15×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 70×15×1.3(2.0) | 220VAC | 180Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 220VAC | 150Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 220VAC | 140Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 220VAC | 120Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 220VAC | 110Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 110VAC | 80Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 110VAC | 60Ω | 70 | 15 | 1.3 | 75 | 0.5 |
| 70×15×1.3(2.0) | 12VAC | 3Ω | 70 | 15 | 1.3 | 75 | 0.5 |
8, 70×20×1.3 mm
| Specification | Model NO. | D | E | H | L | Φb | |
| 70×20×1.3 | 220VAC | 180Ω | 70 | 20 | 1.3 | 75 | 0.5 |
| 70×20×1.3 | 220VAC | 150Ω | 70 | 20 | 1.3 | 75 | 0.5 |
| 70×20×1.3 | 110VAC | 60Ω | 70 | 20 | 1.3 | 75 | 0.5 |
| 70×20×1.3 | 110VAC | 40Ω | 70 | 20 | 1.3 | 75 | 0.5 |
9, PTC Heater in Circle Shape
| Specification | Model NO. | Φb | |
| Ø25×1.3 | 12/24VAC | 13Ω | 0.5 |
| Ø25×1.3 | 12/24VAC | 15Ω | 0.5 |
| Ø25×1.3 | 12/24VAC | 19Ω | 0.5 |
10, PTC Heater in Ring Shape
| Internal Dia. | External Dia. | Thickness | Max. Voltage |
| 6.8mm | 14.25mm | 1.3mm | 7V |
11, PTC Heater in Round Shape
| Specification | Model NO. | Φb | |
| Ø24×1.3 | 12VAC | 4-7Ω | 0.5 |
| Ø24×1.3 | 24VAC | 9-12Ω | 0.5 |
If any questions or ideas,just please feel free to contact us, since we hold the opinion that any questions or trouble can be absolutely settled.
It is our hope, by joint effort, to promote both business and friendship to our mutual advantage.
High Efficiency MCH Ceramic Heating Element for Hair Dryer Item
