Shenzhen Hwalon Electronic Co., Ltd.
Shenzhen Hwalon Electronic Co., Ltd. PTC/NTC thermistors manufacturer
Add to Cart
Low Voltage 12v Ceramic Heating Element For Hair Dryer And Hair Straighteners
Technical features:
1. Energy saving, high thermal efficiency, the unit heat capacity than the PTC save 20%-30%;
2. Security is not charged surface, insulation performance is good, can endure the withstand voltage of 4500v / 10s test, no breakdown, leakage current <0.5mA ;
3. No impact current peak;
4. Heating up fast;
5. Without power attenuation;
6. Security, the halogen-light;
7. Good heat uniform consistency, high power density;
8. Environmental protection, do not contain lead, cadmium, mercury, hexavalent chromium, such as pests, in full compliance with the eu ROHS environmental protection requirements;
9. Long service life.
10. At present the highest temperature can reach 500℃, especially suitable for industrial electric oven.
Parameters of battery powered heating element :
| length | width | thickness | temperature | voltage | the length of the cable |
| 70mm | 13mm | 3.1mm | 275 Centidegree | 220V/110V | 150mm(length as per your request) |
| 70mm | 12mm | 3.1mm | 255 Centidegree | 220V/110V | 155mm(length as per your needed) |
| 64mm | 12mm | 2.9mm | 230 Centidegree | 220V/110V | 250MM(length as per your interested in) |
| 52mm | 12mm | 3.1mm | 180 Centidegree | 220V/110V | 150mm(length as per your request) |
| 35mm | 10mm | 2.8mm | 220 Centidegree | 220V/110V | 55mm( as per your interested in ) |
| 24mm | 8mm | 3.1mm | 160 Centidegree | 220V/110V | 120mm( length as per your needed) |
| 24mm | 6mm | 2.6mm | 150 | 220V/110V | 125mm(length as per your request) |
PTC heating elements:
1. Working Voltage rang: 12-240V AC/DC or customized
2. Surface Temperature: 70°C~300°C , the temperature tolerance less than ±5°C.
3. The lead wire, fiber glass sleeve, insulate film and shells can customized according to per customers requirements.
Unlike traditional heating elements that use a resistance wire such as Nichrome to generate heat,PTC heating elements are made as ceramic stones, ase on barium titanate.
They have unique characteristics as semeconductors and their ferro-electric propertise can be precisely determined during their design.
| General size(Length * width)(mm) | 70*10,70*15,80*13,90*12,55*10,40*34 Special size can be produced according to customer requirements (single-chip maximum power up to 500W) |
| Long side tolerance(mm) | ± 1.00 |
| Wide side tolerance(mm) | ± 0.3 |
| thickness(mm) | 1.3-2± 0.1-0.2 |
| Color & state | White,compact |
Typical Applications:
1. shoe-drying apparatus ,hair curling equipment
2. physical treatment, massage apparatus,biology heating
3. air-heating,wind-warming equipment ,cold and warm air-conditioner
4. mosquito-driving apparatus,boiled-water equipment,heating board
How to Order:
1. Application of the PTC heater : _______
2. Working environment of the PTC heater :______
3. The range of operating temperature:___℃to ____℃
*4. Dimension of the PTC heater: _______
*5. R(25) Value :_____
*6. Surface Temperature:_____
* Fill “*” items necessarily
